What Do Rytec High-Speed Door Sensors and Controls Cost? Photo Eyes, Motion Detectors & Transformers Explained
Rytec high-speed doors lean heavily on electronic sensing and control components to run safely at speed, and when one of those parts fails, the price range you'll see while shopping for a replacement can be confusing — some parts run around $100, others run well over $700. The gap isn't random; it comes down to what the component actually does and how much precision it requires. Here's a breakdown so you know what you're paying for before you order.
Photo Eyes: Emitters vs. Receivers
Photo eyes work in pairs — one side emits an infrared beam, the other receives it, and the door's control system uses a broken beam to know something is in the doorway. Rytec uses a couple of different photo eye configurations depending on door model and mounting style. The threaded-plug-end style used on Fast-Seal and PredaDoor models includes the 0-014-015 Photo Eye Receiver at $618 and the 0-014-016 Photo Eye Transmitter at $452. A separate, more common receiving/sending pair — the 0-014-077 Receiving Photo Eye ($338) and 0-014-078 Sending Photo Eye ($227) — runs noticeably less. The price difference mostly comes down to the connector style and the specific door line it's built for, not the underlying technology, so it's worth confirming your exact door model before ordering rather than assuming the cheaper pair fits.
Motion Detectors: IS40 and Presence Sensing
Motion detectors are the priciest sensors on the door because they're doing more than a simple beam-break — they combine motion detection and presence sensing to keep the door from closing on someone standing in the opening, not just passing through it. The 0-012-867 IS40 Motion/Presence Detector by BEA runs $713, which reflects the dual-sensing technology inside it and its role as a safety-critical component, not just a convenience feature.
Programming Remotes
Every Rytec sensor in this line needs to be configured to the specific door and mounting height it's installed on, and that's what the programming remotes are for. The 0-012-145 BEA Universal Remote ($100) programs the Falcon Sensor and IS40 Sensor specifically, while the separate Remote Control for Eagle, Falcon, IS40 and IRIS ($102) covers a broader range of sensor models. If you're replacing a sensor and don't already own a compatible remote, budget for one — you can't properly commission a new sensor without it.
Transformers & Power Supplies
Less glamorous but just as critical: the 0-011-581 Transformer with Fuse ($408) steps 230/460V input down to the 24V the control system and sensors actually run on. If your door's electronics are behaving erratically across the board — not just one sensor acting up — a failing transformer is worth checking before you start replacing individual sensors one at a time.
Why Prices Vary Between Similar-Looking Parts
The general pattern: simple beam-break photo eyes sit at the low end, dual-function motion/presence detectors sit at the high end, and transformers and remotes fall in between based on their complexity. Two parts that look nearly identical in a photo can differ by hundreds of dollars because one has an extra sensing mode or a different connector standard built in.
If you're not sure which photo eye pair or sensor your door actually uses, send us your door model and we'll confirm the exact part before you order — it's a lot cheaper than guessing on a $600+ component.
Sample Image Gallery
